As a follow up from the initial photos, HAMANN has just released details
regarding the work they have done on the new BMW 7 Series (F01 and F02).
The exterior has been beefed up by installing a new front skirt with
integrated LED daytime running lights, a roof spoiler and a rear
spoiler. Four tailpipes poke out from the rear bumper. Side skirts are
part of the aerodynamic package and they also enhance the look.
The 730d has received a performance upgrade from the stock 180kW
(245hp). According to HAMANN this is only the first stage in the
engine's development. Power has been increased to 213kW (290hp).
Buyers can select from a range of wheels, from 19-inch to
22-inch in diameter. The top deep dish alloy rims are sized at
9.0Jx22 inches up front and 10.5Jx22 inches at the rear. They
come in a glossy black paint with a diamond-grinded rim star.
Respectively the matching tyres are 265/30ZR22 and 295/25ZR22.
HAMANN accessories are a given for this car. Some include aluminium foot
pedals and foot rests with matching embroidered floor mats.
The 730d and 740i receive four progressively coiled chassis springs each.
These lower the cars' centre of gravity by up to 40 millimetres. The 750i and
750Li have a different lowering kit which is made of two chassis springs and a
leveling kit.
Press Release
The HAMANN refining programme for the new BMW 7-series
Individualisation on the highest level
Individualisation on the highest level - this is the motto under which
HAMANN presents its refining programme for the new BMW 7-series of the
model range F01 and F02. Already since 1986, the Laupheim-based company
develops and produces products for the individualisation of BMW
automobiles. Thereby, the HAMANN technicians profit from hundreds of
successful motor sports participations. The competence which was gained
there is the basis for the development of new HAMANN products and
renders the highest level for product quality and processing. The
result: stainless steel exhaust systems with a sporty and earthy sound,
aerodynamics components reducing the lifting forces and striking light
alloy rims from 19 to 22 inches. Interiors perfectly fitted with leather
and combined with floor-mats in matching colours as well as non-slip
aluminium pedals extend the accessory range.
Already when establishing the design, HAMANN perfectly adjusts the
individual components of the aerodynamic pack. The result is an exciting
styling with an optimised air flow across the car silhouette. LED
daytime running lights which are integrated in the new front skirt,
render a sporty-dynamic look and increase the passive safety.
Simultaneously, in combination with the roof spoiler and the rear
spoiler, the lifting forces are reduced and give the upper class
limousine a new, attractive overall appearance. The visual connection
between the front and rear part are the HAMANN side skirts which are
available for the model series F01. The optionally available rear shield
insert for the side skirt of the model 730d and 740i allows fitting the
four-pipe sport end muffler. Four round stainless steel end pipes with a
diameter of 90 millimetres perfectly enhance the rear part of the
7-series BMW and produce a powerful, earthy sound.
A performance enhancement for the Diesel engine with variable turbine
geometrics is already under construction. By this first tuning stage the
serial measure of the 730d (180 kW / 245 hp) increases by approximately
33 kW/45 hp.
A technical highlight of the offered tuning programme is the one-piece
HAMANN-aluminium wheel called DESIGN HM EVO 22 inches. A hallmark of the
modern styling is the glossy black paint with the diamond-grinded rim
star and the discreet deep rim well. Five elongated and over-vaulted
triple spokes document visual and technical finesse. Struts inside the
spokes render additional stability. Modern production processes and the
use of special aluminium alloys guarantee highest bearing loads at a low
weight. Here, HAMANN recommends the dimensions 9.0Jx22 inches with
265/30ZR22 tyres at the front axle and 10.5Jx22 inches with 295/25ZR22
tyres at the rear axle.
The four progressively coiled chassis springs which lower the centre of
gravity with the models 730d, 740i by 40 millimetres at the front- and
rear axles, render a dynamic appearance. For the models 750i and 750Li,
there is a lowering kit consisting of two chassis springs and an evening
kit.
In addition to the existing, serial interior equipment, HAMANN
accessories made first-class aluminium, pedals and foot-rests render
motor sports air and perfectly match the embroidered HAMANN floor mat
set. If desired, even a complete leather equipment can be produced with
expert precision.
Source:World Car Fans
0 comments:
Post a Comment